+971 67421210         Free Delivery all over “UAE” 
  all categories
iSmartINC 605 Injector Cleaner & Tester

iSmartINC 605 Injector Cleaner & Tester

  • Brand:SmartSafe
  • Product Code: iSmartINC 605
  • Availability: 10
  • Weight: 24.00kg
  • Length: 545.00mm
  • Width: 480.00mm
  • Height: 575.00mm
  • AED 10,500.00

- OR -
  • Free delivery all over UAE!

  

iSmartINC 605 Injector Cleaner & Tester


Smartsafe iSmartINC605 Injector Cleaner Tester is a nozzle cleaner & detector suitable for EFI, SFI and other injectors. The nozzle can be cleaned and tested by simulating the engine condition. It can also be used to clean the fuel injector and fuel supply system on vehicle without disassembly. 

Why have to clean injector ?

When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls.

Gasoline is easy to volatile, but wax and varnish were stayed.

Heat these wax and varnish day after day, they will be changed into hard coke.

The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel. The machine work on petrol injector, not for diesel injector 


The hard coke lead 4 problems on injector

  1. Leak.
  2. Blockage.
  3. Poor automization.
  4. Uneven fuel injection.

So we have to clean injector and engine system.


Features

Ultrasonic cleaning

     Ultrasonic cleaning to  completely remove the carbon deposit on the fuel injection nozzle.

Uniformity and atomization test

    Test the uniformity of  injection quantity of each fuel injection nozzle, and observe the injection  state of each fuel injection nozzle with the help of backlight .

Sealing test

    Test the sealing and  leakage of the fuel injection nozzle under a certain pressure.

Injection volume test

    Continue to spray for a  certain time, test the injection volume of the nozzle.

Non-disassembly cleaning (for EFI&SFI)

    Continue to spray for a  certain time, test the injection volume of the nozzle.

Automatic mode

    Automatically test the  fuel injection nozzle through the preset program.


Specifications


Parameters

Specifications

Power Supply

AC110V+-10%~60Hz

Input Power

AC220V+-10%~50/60Hz

Ultrasonic Power

350w

Fuel Pressure

60w

Air Inlet Pressure

0.1~10bar 5~8bar

RPM

100~9900rpm Step: 100rpm

PW

0.5~25.0ms Step:0.1ms

Timer

1~30min

Tank Capacity

3L



Functions

    • Ultrasonic cleaning: Ultrasonic cleaning to completely remove the carbon deposit on the fuel injection nozzle.
    • Uniformity and atomization test: Test the uniformity of injection quantity of each fuel injection nozzle and observe the injection state of each fuel injection nozzle with the Suitable for multiple Powerful ultrasonic help of backlight
    • Sealing test: Test the sealing and leakage of the fuel injection nozzle under a certain pressure
    • Injection volume test: Continue to spray for a certain time, test the injection volume of the nozzle.
    • No disassembly needed (for EFI & SFI)
    • Automatic mode: Automatically test the fuel injection nozzle through the preset program.


    Write a review

    Note: HTML is not translated!
        Bad           Good