iSmartINC 605 Injector Cleaner & Tester
- Brand:SmartSafe
- Product Code: iSmartINC 605
- Availability: 10
- Weight: 24.00kg
- Length: 545.00mm
- Width: 480.00mm
- Height: 575.00mm
-
AED 10,500.00
iSmartINC 605 Injector Cleaner & Tester
Smartsafe iSmartINC605 Injector Cleaner Tester is a nozzle cleaner & detector suitable for EFI, SFI and other injectors. The nozzle can be cleaned and tested by simulating the engine condition. It can also be used to clean the fuel injector and fuel supply system on vehicle without disassembly.
Why have to clean injector ?
When we turned off the engine suddenly, the gasoline which have been spray out can not be recycled. It would attached on the injector and combustion chamber walls.
Gasoline is easy to volatile, but wax and varnish were stayed.
Heat these wax and varnish day after day, they will be changed into hard coke.
The hard coke will be produced more quickly and more thickly when engine work with poor quality fuel. The machine work on petrol injector, not for diesel injector
The hard coke lead 4 problems on injector
- Leak.
- Blockage.
- Poor automization.
- Uneven fuel injection.
So we have to clean injector and engine system.
Features
Ultrasonic cleaning
Ultrasonic cleaning to completely remove the carbon deposit on the fuel injection nozzle.
Uniformity and atomization test
Test the uniformity of injection quantity of each fuel injection nozzle, and observe the injection state of each fuel injection nozzle with the help of backlight .
Sealing test
Test the sealing and leakage of the fuel injection nozzle under a certain pressure.
Injection volume test
Continue to spray for a certain time, test the injection volume of the nozzle.
Non-disassembly cleaning (for EFI&SFI)
Continue to spray for a certain time, test the injection volume of the nozzle.
Automatic mode
Automatically test the fuel injection nozzle through the preset program.
Specifications
Parameters |
Specifications |
Power Supply |
AC110V+-10%~60Hz |
Input Power |
AC220V+-10%~50/60Hz |
Ultrasonic Power |
350w |
Fuel Pressure |
60w |
Air Inlet Pressure |
0.1~10bar 5~8bar |
RPM |
100~9900rpm Step: 100rpm |
PW |
0.5~25.0ms Step:0.1ms |
Timer |
1~30min |
Tank Capacity |
3L |
Functions
- Ultrasonic cleaning: Ultrasonic cleaning to completely remove the carbon deposit on the fuel injection nozzle.
- Uniformity and atomization test: Test the uniformity of injection quantity of each fuel injection nozzle and observe the injection state of each fuel injection nozzle with the Suitable for multiple Powerful ultrasonic help of backlight
- Sealing test: Test the sealing and leakage of the fuel injection nozzle under a certain pressure
- Injection volume test: Continue to spray for a certain time, test the injection volume of the nozzle.
- No disassembly needed (for EFI & SFI)
- Automatic mode: Automatically test the fuel injection nozzle through the preset program.